Subject: Needle valve slide carbs. Was P-port
From: Rotary Engine
Date: 11/26/2007, 5:34 PM
To: AARotary Engine


Opss you are right! I need more like 100 pounds per hour or 16.7 gallons an hour
per rotor.

Paul,
Yep ! that looks about right, Stoichiometric is 14.7:1 about .55 lbs of fuel
per hour, but  Best Power ( 12.65:1) or about .61 lbs of fuel an hour.
Therefore164 hp x .61 =100 .04 lbs per hour /6 lbs per gallon ( US) = 16.67
gallons per hr at WOT.

Cruise ( 6,000) might at a guess be 123hp ( 75%) at may be .48 lbs of fuel
an hour ( leaner);  123 x .48 / 6 = 9.84 gph. What is your estimate on
cruise?

For myself I was working on my minimum expectation of  the single rotor at
115 hp at 14.7:1; 115 x .55 = 63.25 /6 = 10.54 gal an hour.

George ( down under)



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.