I spent some time doing this for somebody so
I will share this dwg.
-- 
Paul Lamar ...No rotor no motor.

Hello Paul,

Is this drawing (13b)  available on solid works?
it is a very long process to take measurements
on the engine; and without proper drawings, the
risk is to have to re-do things over and over.

Thanks,

JP

I can send you a zipped  IGES that will load into Solid Works.

The landing gear and loads  however were added with a paint program
so that will not appear in the Solid Works file. jpg only.

If you don't get the 7.4 meg  zipped file let me know and I will
put it on the web site for your download using a browser.