I spent some time doing this for somebody so
I will share this dwg.
-- 
Paul Lamar ...No rotor no motor.

Hello Paul,

Is this drawing (13b)  available on solid works?
it is a very long process to take measurements
on the engine; and without proper drawings, the
risk is to have to re-do things over and over.

Thanks,

JP

I can send you a zipped  IGES that will load into Solid Works.

The landing gear and loads  however were added with a paint program
so that will not appear in the Solid Works file. jpg only.

If you don't get the 7.4 meg  zipped file let me know and I will
put it on the web site for your download using a browser.

-- 
Paul Lamar ...No rotor no motor.

Paul - wow, IGES files.  i worked for McAuto some 30 years ago when IGES was
being defined.  i was pushing for the ANSI format, kinda like the VHS/BETA
where BETA is better, but IGES is bigger.  I'm a carpenter now so have no
exposure to that world any more.  actually either format worked fine for the
geometry.  it was all the other stuff that added to the complexity, like
dimensioning, grouping, etc....    kevin


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.