Paul,
This is great if we could find somebody on this side of the pond the whole
intake tract could be made out of this and a couple of pieces of straight Al
tube with some injector bungs welded in or bell mouths to work with your low
pressure injection system.

Joe Berki
Limo EZ

I had the water plumbing in mind :)
As long as the slide throttle is next to the engine
it would work as intake runners.
-- 
Paul Lamar ...No rotor no motor.

Here is another supplier.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.