Hey Paul,

   I sent this before and you didn't post it up. I don't know if
   you lost
   it or just didnt want to put it up. Either way here is another
   try at
   it. As far as I know this is the most powerful normal rotor(645cc)
   sized engine ever. Looks like the two studs for exhaust aren't
   enough
   clamping pressure.I saw on your site that the 800 three rotor
   utilized
   four smaller exhaust studs. Is this a problem that these engines run
   into when really pushed?

   http://youtube.com/watch?v=uO1782B6RZw


   Rob Woods

   Sorry Rob. I don't think I got it. Earthlink is not the most
   reliable ISP. They just sent me a bunch of double messages.

   To answer your question the two studs are not a problem if you use
   a stock, thick 3/8th or 1/2 inch steel exhaust flange. The reason
   for the four studs is to decrease weight.

   It is the most powerful rotary I have heard of.

   Paul Lamar ...No rotor no motor.

   Scary how fast the pipes turn red. Eesh. I wonder how long you could
   run one at that output.

   There are several good 4 rotor vids out there now. The one in this vid
   sounds fantastic..

   http://www.youtube.com/watch?v=tpyZuAtH-FQ

   The sewer pipe sized plumbing on several of these cars is impressive.

   http://www.youtube.com/watch?v=xC9WzB-oXMU


   Matt-


   Paul,
   I ran across a video of a n/a 20B with a slide throttle. Good closeup
   down the velocity stacks.
   http://www.youtube.com/watch?v=bIGr0Oo8je8&feature=related

   Mark Steitle.

   Thanks Mark.
   I love the sound of the idle. Nice muffler. Cleans right up
   and heads out :) Our RX8 p-port engine idles much better.
   Looks like an early version of our Teflon
   slide throttle. More power to them. Literally :)

   I wish I had an email address for this outfit
   as I would like to get some feed back on their experience
   with the Teflon slide throttle.

   --
   Paul Lamar ...No rotor no motor.

Paul,

http://www.mpsys.ca/MPSv1.htm
All of their contact info. I just wanted to add these clips as the best
sounding rotary I have ever heard. Including the R26B go figure. Nice
little car.
Vid 2: http://www.youtube.com/watch?v=D8K9RGUF3Bo&feature=related

Vid 3: http://www.youtube.com/watch?v=r9dwENa9A5c&feature=related

Vid 4: http://www.youtube.com/watch?v=1qPlvCKwaBU&feature=related

Vid 1: http://www.youtube.com/watch?v=AbwrQ2f-kLg&feature=related

Rob Woods



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.