Subject: Preliminary Lancair 360 turbo plumbing 3D
From: Rotary Engine
Date: 12/17/2007, 11:07 AM
To: AARotary Engine

This is the stock 2nd gen turbo and exhaust manifold.
Beg, borrow, steal or mortgage the family home
and get a Mistral turbo designed specifically for
the rotary. Doug Fir noticed it was turned around
the right way for tractor aircraft use. The turbine is at
the back and the compressor is at the front where it needs
to be. No crossing over the exhaust and intake plumbing
as shown here in the 3D's. Thank you Francois.

Here is a picture. Also a picture of Dave Leonards stock
2nd gen turbo install which I stole.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.