Subject: New rotary powered aircraft concept
From: Rotary Engine
Date: 12/19/2007, 9:41 PM
To: AARotary Engine




   One of my hangar neighbors at Santa Paula has come up a new design
   and is interested but not yet committed to the twin turbo
   charged rotaries. He would like to communicate with Dave Leonard
   who has the most turbo rotary experience so far IMHO.

   Dr. Jurg Sommerauer is from Zürich Switzerland and knows the
   people that started Mistral. Namely the Mecanair folks.

   Quote from his web site:
   "He has wide experience in composite aircraft construction.
   He is an expert in working with civil aviation authorities
   such as the Swiss BAZL, the German LBA, and the Austrian BAZL
   as well as the experimental aircraft associations.
   He and his wife have built an award-winning Glasair RG, had
   it certified by Swiss authorities, and had it flown across
   the North Atlantic to the United States. He has been
   contracted by a Swiss Company to build a wing for extremely
   slow stall speed for a special project with successful results.
   Jurg built or assisted in projects like Glasair RG, Lancair 320,
   Lancair IVP, Swift, Long EZ, Vary EZ, etc.. Currently, Jurg
   is designing an all carbon composite twin-pusher high
   performance kit plane. Jurg is president and owner of AVI
   and directs R & D of AVI and EZE Instruments."

   Jurg also did extensive redesign and reconstruction on Dan Wright's
   Nemesis Nxt at his Santa Paula hangar. Apparently he travels back and
   fourth to Ogden Utah in his Glasair RG :)

   I'll be helping him out with proposed 3D installations of rotaries
   in his two engine pusher.

   We need to indoctrinate Jurg in rotary engine technology :)

   Dave Leonard, please contact him at the email address on his web site.

   Jurg, here are some pictures of Mistral's new custom turbo charger
   specifically designed for the aircraft rotary.

   Paul Lamar ...No rotor no motor.


   Paul,
   That's a fair sized exhaust by-pass, however I'm a believer of
   bypassing the
   exhaust before the turbo for heat reasons. However do you know their
   target
   criteria - how boost is controlled, boost to rpm, AR of inlet
   (compressor)
   and exhaust ( Turbine), cooling water or oil, turbine wheel
   materials used,
   who makes the turbo or anything like that which might be of some
   interest in
   comparing with aftermarket turbo's and /or identifying how they
   control over
   speeding the Turbo at high altitude.
   George (down under)

   I have no idea. Francois is not volunteering that info so far.
   BTW here is Jurg's web site.

   www.aerovisions.com <http://www.aerovisions.com>

   Paul Lamar ...No rotor no motor.


I Paul,

Thanks for the compliment and confidence.  But given the experience and
knowledge of so many of the people on this list and elsewhere, I feel a
little uncomfortable being considered the leading expert on the
subject.  My only advice to Jurg is to use a big turbo and let it loaf.
Otherwise, just keep building.

-- 
David Leonard

Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net <http://RotaryRoster.net>

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.