This is about the best turbo charger 3D model I have done
so far. Next is the exhaust manifold with waste gate to fit
a Lancair 320. Maybe just a PicAXE controlled pop off valve.
Should have around 400 HP available if necessary.

I am thinking of getting Jerry to weld it up out of R.B
Wagner .090" wall thickness  SS bends.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.