Hi paul & All,
Were now at +30 mins. Run time, 12 starts,
Test set-up getting cleaned up!
Will remove PSRU next and get some measurement to identify gear set,
Local mechanic says planetary looks like Allison.
Baron 3in1 Gauge, Cyl Temp is on the Psru housing.
Fuel Press is Coolant Press, Will do labels
Last 3 Runs approx 3 min. each.
Tach is from KitFox, I will do calib. check next run.
Used your method to check TDC, Timing now at TDC easy starts.
Have Up-Loaded Video for your listening pleasure!
http://www.youtube.com/watch?v=BBdZbCldOGM
or search subject above
Best Regards
Rolland(Philippines)
KitFoxes RP-S135/S2804

Great Rolland. Thanks for putting it on Youtube.

You will need  to set the timing sooner or later to 20 degrees
before top dead center for good fuel burn and power.