Paul or others

Is there a turbo kit for a 20B?

Rick Irwin
20b Cozy MkIV

I don't think so. I have never heard of one.
You will have to make your own manifold.
-- Paul Lamar ...No rotor no motor.

Rick, most of the 20B's were turboed in the car,so there isn't
a bunch of stuff for them. Also since they were never sold in the
US in any quanity (Racing only) you are selling to a VERY small
pool of buyers. That makes it uneconomical unless you are doing
it for yourself anyway. Mine was a twin-turbo progressive setup.
Bill Jepson


There was a guy that flew a stock 20B sequential turbo set up in
a Cozy type airplane back in 1998. His name was Brice Daunay as I recall.

This is a picture of Brice Daunay stock turbo three rotor
in a puher of his design.
Brice claims 300 HP at 6000 RPM with a 2.17:1 Ross PSRU
and intercooler.

He also says the weight is 425 pounds. Sounds low for a
stock turbo setup.


Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.