Hi Michael,

Charlie Shatzen gave me your contact information.  He told me you are
building a rotary powered airplane.

I'm contacting you because I have an ECU designed for a rotary engine,
more specifically, one to be used in an airplane.  I purchased the EC-2
made by Real World Solutions two years ago for use in a race car.  I've
decided to go with a system more familiar to racers so I can more easily
exchange information.  I'm wondering if you or anybody else you may know
is interested in buying the EC-2 at a reduced price.

The unit is new in the original box.  It was never installed, and comes
with the custom wire harness built by the guy RWS recommended.

I assume you are part of a forum or group of enthusiasts doing rotary
aviation.  Please let me know if you or one of your peer group is
interested in this unit.

Thank you,

Steve Smyczek
262-879-9999
cell 414-339-5084



  All
    I received this from Steve who is looking to sell his EC2 and wiring
harness for $600.  Thought maybe one of you guys would be interested.
Please contact Steve Directly... His E-mail is: ssmycz@execpc.com

Steve If you need to sell the harness separately let me know and I'll
take it off your hands.

Mike C.

FYI, That wiring harness has fairly short leads.  You will probably
have to splice on an extension for most aircraft applications.

Note:  The wiring harness was ordered by Tracy, and I never had any
direct correspondence with the Mr. Smyczek.  (It's the only one I built
for an auto application that I know of.)

Bob W.