Paul, FYI, I have been contacted to build engine mounts for an RV -7
and also a Zenith 801.  The RV7  wants a belly radiator (symmetrical  S-
beam ?) but otherwise probably the drawings you have already done will
suffice.  The 801 is different from anything we have done.  The
firewall leans back about 18 degrees,  there is a fifth hard point top
of the firewall center and the drawings are metric.     I will send
all the data as soon as I receive it, probably next week.   Jerry

OK Jerry. No problem. Probably not as bad as Thorp :)

-- 
Paul Lamar ...No rotor no motor.

I've been lurking on the list for a while; I'm also putting a renesis
in an 801. I intended to fab my own mount, but have proceeded no
further than taking measurements; let me know if you need any info.

--Kenny Aron
http://websites.expercraft.com/kennya



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.