Paul,
Amazing contacts and tidbits that you have. Putting an axial
flow turbine wheel on the flywheel [of a rotary] is exactly what I was suggesting a
few weeks ago. Is the turbine wheel in pic #2 a currently available
part? (as a base for study) How about other sizes?
The SAE paper on lightweight engines was very informative. Wankel ag
did lots of good development work. Did I read that they are no longer
in business? Now we need a LCCR engine with axial flow power turbine
and conventional turbocharger - .35 lb/hp hour and more than 1hp /lb?
Sized for the LSA market @ 130 hp, keeping up with orders would be a
nice problem to have.
Dan Friebel
Yes that is true Wankel Gmbh is out of biz. They had trouble with
the wear coatings applied to the aluminum.
We have been here for ten years in April :)
As Don Sherman and David E. Cole Chairman of C.A.R. will tell you I have
been advocating the turbo compound rotary for 30 years.
I am very pleased it is starting to come together through
the back door of the truck market.
There are lots of turbine parts available in the used turbo jet and
turbo prop market. Something like a PT6 turbine should not be too hard to
find.
http://www.calltru.com/parts_components/index.html
http://www.specialtyturbine.com/question_search.php?q=all
http://www.jsamiami.com/
Here are some shots of a guy in Western Australia that nearly put
one together using an R3350 blow down turbine.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.