Subject: PRATT & WHITNEY, TURBO-COMPOUND ROTARY ENGINE
From: Rotary Engine
Date: 2/7/2008, 9:13 AM
To: AARotary Engine


> > Paul
> >
> > Have you seen this?
> >
> > http://www.wipo.int/pctdb/en/wo.jsp?wo=2004074655
> >
> > Erik Wahlstrom
> >
> > Very interesting but so far I don't understand exactly what it
> > is they are trying
> > to do and I am not a lawyer let alone a patent lawyer :)
> > Combining a Wankel
> > rotary with a turbine is a good idea no matter how they go
> about it.
> >
> > However there must be something beyond that I don't understand
> > or they would never get a patent.
> >
> > The dwg's are not too clear. Too bad they don't allow 3D's
> in patents.
> > --
> > Paul Lamar ...No rotor no motor.
>
> The two inventors are living about 15 minutes from my house. If you
> need me to get a hold of these men Paul. I should give a try. Who
> knows they might like this forum. What do you think Paul?
>
> Marc J
> NexusMustang
>
> I think it is a good idea. If they wish I will do a 3D version
> of the dwgs
> in this patent to make it easier to understand. I still have not
> figuredout what exactly they are bringing to the table :) They
> also need to explain
> the kinetic energy difference in the rotary as compared to a an
> ordinarypiston engine with exhaust valves.
>
> Thanks Marc.
>
> BTW notice in both the Detroit Diesel and Volvo implementation
> of the turbo
> compound both are exploiting the helical energy in the turbo
> charger turbine
> exhaust. This is analogous to the wasted helical energy in a
> prop driven
> aircraft situation. Scania needs to clean up their act
> aerodynamically speaking
> as there is at least one 90 degree turn in the plumbing between
> turbo charger
> exhaust and blow down turbine. That turn significantly reduces
> the kinetic energy
> available for the blow down turbine. We know that to be true
> because of the
> volumetric efficiency advantage of the p-port rotary compared to
> the side port
> rotary.
>
> I also just discovered that Scania has been building turbo
> compound diesel
> engines since 1991. Looks like it has taken close to 20 years to
> catch on
> probably due to the less than ideal configuration of the Scania
> design.
> Detroit Diesel also needs to streamline the exhaust manifold
> between the
> exhaust valve and the turbo charger turbine.
>
> Turbo compound truck engines are now becoming a band wagon.
>
> Apparently Volvo has a come up with a similar configuration to
> that of
> Detroit Diesel. Hard to say who invented it first.
>
> What is quite amazing is the diesel guys have pulled it off with much
> less waste heat in the diesel exhaust than that available in a piston
> gas engine. A Wankel rotary has at least twice as much kinetic energy
> in the exhaust as a piston gas engine.
>
> I predict the turbo compound Wankel engine will become the
> engine of
> choice, first in prop driven aircraft or helicopters, generator
> sets, boats
> and then in cars. There is a lot of engineering work to be done
> so I hope Mazda starts soon.
>
>
> Paul Lamar ...No rotor no motor.


Good morning Paul,

I just called both inventors at their home phone number and left a
message on their answering machine.  Should get more info tonight went
they call me back.

Marc J.
NexusMustang

Thanks Marc. That is a great contact. Perhaps PRATT & WHITNEY of Canada
can pull it off for the helicopter market. They certainly having the marketing
clout. Come to think of it they may be competing with Mistral for the
Russian Helicopter engine biz :)
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.