Zenair dwgs
   --
   Paul Lamar ...No rotor no motor.


Another point about this drawing is it doesn't represent the nose gear
strut channel. The strut rides in a channel that is centered on the
firewall centerline from the firewall bottom to approx. 2/3 of the way up.

With the 18.5 degree slope, there are potential interference issues
between the strut/upper bearing supports and the engine pulley area- you
may need to extend the engine forward more than you're accustomed to.

You can see what I'm referring to in the gear-s1/s2 photo guides on
http://www.zenithair.com/stolch801/manuals.html
--Kenny A.

http://websites.expercraft.com/kennya/



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.