A few years ago some SCCA rotary road racers had discovered the lower
the oil temp the more the power. It did not dawn on me
why that was necessarily true until I read the SAE paper I just up loaded.
Here is the reason. The volumetric eff. of the engine is being
affected by the temperature of the face of the rotor which in
turn is being cooled by the oil.
Keep the oil hot during cruise for best BSFC and cool for max power.
------------------------------------------------------------------
A 6% improvement in the BSFC would drop the BSFC from the current
.47 to about .44 which is about the same as a Lycoming.
The typical cruise fuel burn would go from about 10 GPH to about 9.4 GPH.
Easy to do. Just put a cowl flap on the oil cooler air outlet.
Not only will that warm the oil during cruise it will cut the
aerodynamic drag. This has pertinence in endurance road racing as
well as aircraft.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.