Subject: SAE paper on turbo compounding
From: Rotary Engine
Date: 2/24/2008, 3:50 PM
To: AARotary Engine


This is about all low heat rejection engines. Not just turbo compounding.
Good list of references on other work.

Paul Lamar ...No rotor no motor.


Paul


So it looks like we need an rotor that is light weight, strong and has
insulating properties.  Titanium.  The recessed area within the rotor faces
could be steel to absorb and retain heat.

Can't imagine how expensive this rotor would be:)



Doug in Japan

I am thinking stainless Steel easy to cast and I think it does
not conduct heat as easily as cast iron. I am still looking into it.
You can still cool the bearing without cooling the combustion surface.

Paul Lamar ...No rotor no motor.



I think you have to be wary of thermal expansion of the rotor causing
binding if you don't cool it enough. Not just the bearings,


Bill Schertz
KIS Cruiser #4045
N343BS (reserved)

Good point Bill. Clearance should be calculated to take that into consideration.

What is the thermal expansion coef. of SS compared to cast iron.

---------------------------------------------------------

http://www.handyharmancanada.com/TheBrazingBook/comparis.htm

Ten to the minus sixth inches per inch per degree F.
00.000006" times 1000 F =  .006 inches per inch at 1000 F.
Six thousand of an inch per inch at 1000 F change.
Three inch wide rotor is then .018" or 18 thousands of an inch
wider (I think) starting from room temp. Check my arithmetic.
Of course the engine is a bit longer too.

Ferritic Stainless Steels.....     6
Gray Irons (cast) ............  6          
Stainless Steels (cast) ......     10.4
Nodular or Ductile Irons (cast) 10.4
Austenitic Stainless Steels...     10.2
High Temperature Steels.......     7.9
Alloy Steels .................     8.6
Titanium & its Alloys.........     7.1

At 500 F it would be half that.
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.