Subject: Swiss firm plans aircraft engine facilities at Daytona airport
From: Rotary Engine
Date: 2/27/2008, 4:03 AM
To: AARotary Engine


      Swiss firm plans aircraft engine facilities at Daytona airport
      Mistral to invest $2 million over five years.
      Orlando Business Journal - by Chris Kauffmann Staff Writer


      DAYTONA BEACH -- A Swiss startup firm has big plans for a small
      parcel of land at
      Daytona Beach International Airport.

      Geneva-based Mistral Engines SA recently signed a five-year lease with
      two five-year options for a parcel of land to be used as the site
      for a 1,800-square-foot building to develop and test rotary
      engines for use in general aviation aircraft.

      Eventually, the plan is to get the engines certified by the
      Federal Aviation Administration, and then to build or lease
      a larger building at the airport or somewhere else in Volusia
      County to assemble the engines.

      At least two dozen jobs could be created as a result, says
      the 6-year-old company.

      "The aerospace and aviation industries are important to our
      economy, and this will bring new products and jobs to our area,"
      says Phil Ehlinger, business manager for Volusia County's
      department of economic development.

      Mistral will invest about $2 million in the entire project,
      including the buildings and payroll during the next five years.

      Mistral already has $14 million of the $18 million in private
      equity money it plans to raise for operations in Daytona Beach
      and Switzerland, says CEO Francois Badoux.

      The first phase of the project, the testing facility, should
      be operating by late March. Sometime next summer, the company
      will set up offices to work on developing a customer base and
      other commercial activities.

      A date for opening the assembly plant has not been determined,
      but it will be after the FAA certifies the engines -- possibly
      in 2009, Badoux says.

      Mistral essentially is adapting the rotary engine technology
      used in the Mazda RX7 and RX8 automobiles for small aircraft use.


Idle curiosity: Does anyone know if Mistral is buying any parts from
Mazda.  Or are they building (or contracting-out) everything?  If they
aren't buying any Mazda parts, I am surprised that they wouldn't go with
peripheral ports on their engines.  Their intake manifold is beautiful,
but P-ports would be simpler, smaller, and lighter..  Maybe they would
disagree?

We may have talked about this before (when Mr. Badoux was still
participating)..


Matt-

They buy some parts from Mazda but they don't go into certified
engines. I think they use the Mazda parts for R&D and testing
that does not involve the certified program. They have their own
patterns for most if not all casting that are slightly modified
from the Mazda parts. They started making patterns for core engine
parts about 2004. Of course they had gear box and front cover
castings before that. The last couple of years at OSH they
have only shown complete engines so it is hard to tell what
is theirs and what is Mazda's.

I've discussed p-ports with Francois many times. I think he feels
they are not needed for the HP levels they are looking for.
He probably also feels it would cost a lot to start over with
P-ports in the R&D  and certification programs and there may
be unforeseen problems with P-ports. From a business point of view
I agree. You sell what you have first.

  From a technical point of view I don't happen to agree but they are
very successfully so far marketing their side port rotary engines
to Russian helicopter makers.

I think once they get engines certified and manufactured in
quantity there may be some money and time for P-port  or turbo compound
R&D.


Here are some shots of their own castings.

BTW I uploaded some videos of the Mistral test Piper to Youtube.
http://www.youtube.com/watch?v=aLY139b65a0
http://www.youtube.com/watch?v=3JQVeMoKBT0
http://www.youtube.com/watch?v=Lo1TqhQqOkg


-- 
Paul Lamar ...No rotor no motor.


Looking at their castings and engine is like looking at fine art!!!
Amazing.
Alex Rose
Sportsman Kit # 7032



Communication from Mistral Engines:

We indeed got a LOI (and draft lease) from Volusia County authorities for a parcel
of land on Daytona Beach International Airport property to build our propeller
engine-testing facility.  The press article below was correct until early January.
Totally unexpectedly, Volusia County's Land Use Committee vetoed the lease a few
weeks ago, leaving us with useless engineering and architect drawings and a screwed-up
construction schedule.

We are now negotiating with the municipal authorities of another Florida city a lease
for this facility, as well as for an assembly workshop.  If and when contracts are
signed, I will keep you posted.

I can also announce you that we have hired as of January 1st 2008 a full-time US
Operations Manager in the person of Dr Stephen Roth (aka Steve or Doc) and plan to
hire more US employees during the course of the year.

Finally, I would like to apologize for not participating in this forum as much as
I used to or wish.  With certification in sight, I just do not have the time.

Best regards to all,

Francois Badoux
CEO, Mistral Engines


Thanks for the update Francois. Check out Massey Air ranch in Edgewater
just to the south of Daytona. No tower means you can get up and down quicker :)

-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.