Subject: Opps I just invented something again IMPORTANT
From: Rotary Engine
Date: 2/28/2008, 5:52 AM
To: AARotary Engine


>  > VERY IMPORTANT:
>  >
>  >
>  > BTW Bill, how do you convert BTU to Horse Power.
>  >
>  > If I use http://www.onlineconversion.com/energy.htm
>  >
>  > They 1 000 Btu = 0.393 014 802 horsepower hour
>  >
>  > Are BTU based on minutes so that is really .393 X 60 = 25.58 HP?
>  >
>  > I am trying to get a handle on the size and capacity of this oil
cooler.
>  >
>  > This is the ONLY oil cooler I have good and complete data on.
>  > Both air side and oil side.
>
>   > Paul Lamar
>
>  Paul,
>  A BTU is a measure of energy.  Power would be BTU per unit of time.  1
>  BTU  =  778 ft-lb
>
>  So, 1 BTU/hr  =  778 ft-lb/hr  =12.97 ft-lb/min  =  3.93 E -4
horsepower
>
>  Inverting this we get:   2545 BTU/hr  =  1.0 hp
>
>  Aubrey
>
>  Hummm you mean if I apply a torque on a stationary bolt for a period of
time
>  that is energy? How did I miss this in 72 years :) I am not saying
>  you are wrong. Far from it. I totally believe you. I must have skipped
that
>  physics/thermo class. Obviously this is a huge gap in my thermo self
education.
>
>  There is no doubt my body would be burning calories.
>  If you stood up for a period of time you would be burning calories.
>
>  I thought it had to be rotating to get HP.
>
>  So a BTU is a torque! Wow.
>
>  What is the HP that this oil cooler is dissipating
>  when it says 400 BTU's/min? We need about 50 HP for a 200 HP
>  rotary.
>
>  Now I am changing the subject to turbo compounding.
>  Here is another hypothetical situation. If the 1700 F exhaust gases
>  were not moving what would be the BTU? Would it depend on on how long
they stayed
>  at 1700 F? Would it be a function of the volume of the container?
>
>  I am just thinking out loud here.
>  Then the kinetic energy in the exhaust is only the mass of the gas
moving at
>  some speed? The heat of the gas has nothing to do directly with the
kinetic
>  energy. The application of heat of course increases the kinetic energy
>  of the gas as it expands the gas. The gas expansion in an open ended
pipe causes an
>  increase in the kinetic energy as the expanded gas speeds up trying to
get out.
>
>  Is that an accurate description of what is happening?
>
>
>
>  Paul Lamar ...No rotor no motor.


Technically you don't have to rotate to have horsepower (but there
must be motion), as horsepower is defined as lifting weight a distance
(against gravity) per unit time.  Rotation is just common for machines
that do work by rotating shafts.


http://en.wikipedia.org/wiki/Horsepower#History_of_the_term_.22horsepower.22

Horsepower is a context specific measure of power (work done/unit time).

Watt is a more context general measure because it can relate to heat
or light or how quickly a load is moved a distance.

It takes work to raise the temperature of an object.  Similarly it
takes work to hold an object at a temperature above its surroundings,
assuming imperfect insulation.

I agree with what you're saying however.  One thing I would add is
that on a turbocharger you can lower the temperature of the exhaust
gas more than by just heating the turbine - as you said, the gas can
be expanded.


Matt-


Paul,

Just in case you don't all-ready have it, Josh Madison wrote a conversion
exe program you can put on your desk top and convert just about anything to
anything with it:  http://joshmadison.com/software/convert/

I have been using it for years - thought everybody had it by now.

Cheers,

Norm



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.