Subject: From the BD-5 Group
From: Rotary Engine
Date: 3/1/2008, 8:06 AM
To: AAA Put this in the To box


Be careful not to confuse the players in this segment of the engine
industry. My company
manufactures target drones and we have a great deal of experience with
rotary engines.

You are correct that the engines are smooth as silk and have a great
weight to power ratio,
fuel burn is a little higher than general reciprocal engines. Our
experience with 46
engines flying with 1, 2 and 3 rotors is .0625 per hp on average with
15psi boost with full
turbo applied. We have 1 rotor 185hp; 2 rotor 275hp and 3 rotor 475hp.
Do not confuse
these power ratings with a pilot based engine as we are not concerned
with long range
durability of engine. 1500hr engine I would expect 125; 250; 350hp
respectfully as
possible high end power rating. Cruise power would be 75-80% of these
numbers.

It is true that Freedom Motors engine technology is based on OMC
original research but
they are more hipe than real. Would not count on anything these guys say
coming into
reality soon. On the other side Rotomax is truly a diamond in the rough.
Real engines
and real people also based on OMC original technology. These guys are
not related and
the companies, although roughly based on the same original technology
are very different
animals.

There are several rotary engine companies working on diesel (Jet A & B)
fuels. Technology
is advancing but at least 2 to 5 years away with fully funded companies
of witch none of
the companies we are aware of have progressed far enough along to be
fully funded. This
industry is a very tough business.

If you are interested in a rotary engine for the BD5, I think you are
going in the right
direction. A single rotor conservative engine would put out 125-150hp
with full turbo at
126lbs total weight. (almost a 1hp/1lb ratio) Full power to 18,000. Size
and weight would
seem ideal for the BD5. Twin rotor would be an extreme machine with the
capacity of
250hp at about 260lbs. My understanding this would be just over the
original Honda
engine powered BD5's. Not sure current drive system would handle
additional HP of single
rotor let alone the twin, but I think the talent pool of this group
could solve that issue.

Would love to see someone that knows the performance calculations for
the BD5 to run
the numbers on a 150 and 250hp flying BD5. I would think the numbers
would be equal
or close to the Lancair IV. One would also need to look at the
structural issues associated
with these numbers as flutter would be an issue.

Our drones are fully Carbon/Kevlar composite construction pusher
configured, but use a
drive system taken from the Mini-Imp design with carbon/kevlar fiber
drive shaft. I think
this could be retrofitted into a BD5, not real sure as I have not seen a
flying BD5 up close.

send me an email if you would like our engine data.

PS: Cooling is more critical for a rotor engine than others.

Good luck

Dr. Bruce Fischer [mailto:fischer.bruce@yahoo.com


Hi Doc,
Have you given any thought to turbo compounding the rotary?
http://www.rotaryeng.net/
What do you think?


Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.