Subject: Milner Motors AirCar
From: Rotary Engine
Date: 3/3/2008, 10:11 PM
To: AAA Put this in the To box


Paul,

Yes or bring it to the logical conclusion and make the body panels FRP
sandwiching thick foam and modular so that damaged panels can be replaced
easily.  Here is a site that contains many three wheelers you may like.

http://www.rqriley.com/  The XR-3 uses the crumple zone design philosophy.


The Salmon 32 is close to your roadable airplane configuration already.   I
am thinking one of these DIY made in  Nepal as an around town vehicle.  Of
course on LA streets  crush zone takes on a whole new meaning when you
encounter a truck who moves over into your lane because the driver doesn't
see you in side view mirror.

http://rqriley.com/tech-ov.htm


Doug in Japan

Robert Riley has been successful for decades. Notice the design strategy
he is using for the tricycle design - CG shifting suspension. For the
tail dragger design you don't need this, but a Trike you do because the
first time you brake hard in a turn with a trike you will have the dirty
side up unless you're and expert alert driver. Nearly all the successful
"3 wheeled cars" have been in the tail dragger config.

-dave


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.