I found an old SAE paper 730119 on the OMC engine.
A very interesting paper.
I noticed that OMC had good luck with aluminum
side housings made from hypereutectic aluminum.
The same process used by GM on the Vega engine.
Does anybody have any direct experience with
OMC snow mobile rotary engine side housing wear problems?
I wonder how Silicon Nitride ceramic
side seals would work on hypereutectic aluminum.
Perhaps OMC was better able to control the casting
process than GM.
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.