Subject: Sharpie 500 RV race
From: Rotary Engine
Date: 4/6/2008, 6:12 PM
To: AAA Put this in the To box





  Yesterday we had the first semi-annual Sharpie
500  RV race.  It was a blast, with a lot good times and trash talking.
But mostly it was a relaxing cooperative atmosphere.  My fixed pitch
rotary RV-6 held its own with its over-pitched 3-blade prop against
180hp and 200hp RV's all with constant speed props.

The results are posted at the bottom of the page:

http://rvproject.com/race.html

Two of the planes were not going for speed, but best economy.  The two
fastest were tandem aircraft with a significant advantage there. Two
guys were running rich of peak (rivet and Eddie).  I was running at best
power.

If the overall speeds seem a little low compared to other race results
its because

1) we were all mostly doing something in improve efficiency
a little (for example, I climbed to 8.5k)

2) there was a 35kt quartering
cross wind

3) It was very bumpy

4)terrain required a climb to at least 5.5k to just squeak over the ridge.

So don't be fooled, those are some very fast planes.  I was seeing
true air speeds in excess of 190 kts [219 MPH] most of the way back.  Dan
Checkoways plane in particular is an aberration.

Good times.  Keep building, its worth it.

-- 
David Leonard

Turbo Rotary RV-6 N4VY
http://N4VY.RotaryRoster.net
http://RotaryRoster.net

This well illustrates the importance of a good variable pitch prop.
Of course there are a lot of other factors in a cross country air race
such as climb and decent  relative to winds aloft.

Don't make the mistake of buying a $10,000 German MT prop. They are
about 10 to 20 knots slower than a good Hartzel or McCauly. Unfortunately
Tracy's gear box does not support a hydraulic constant speed prop.

See if you can find an electric prop with carbon fiber blades.
The over priced MT props are wood with a thin layer of glass mat.

My theory is; it all has to do with blade thickness out near the tip.
Efficient props have very thin tips as illustrated in the results
from this race and the fastest Reno racers. Wood is not stiff
and strong enough to make a thin prop blade tip possible. Metal
is better and carbon is better yet.

Large diameter two blade  props are always more efficient so
prop tips are always in the transonic range consequently
tip drag is all important.

Paul Lamar ...No rotor no motor.


look at : http://www.variprop.com/

i believe they just finished the RV-6A testing

Kevin Lane

That looks like a great idea. Apparently they use an annular hydraulic
cylinder just like an automotive  clutch throwout cylinder to change
the pitch. No need for a hollow prop shaft. Should work with
Tracy's box. I would specify carbon blades.


Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.