> > Yesterday we had the first semi-annual Sharpie
> > 500 RV race. It was a blast, with a lot good times and trash
> talking.> But mostly it was a relaxing cooperative atmosphere.
> My fixed pitch
> > rotary RV-6 held its own with its over-pitched 3-blade prop against
> > 180hp and 200hp RV's all with constant speed props.
> >
> > The results are posted at the bottom of the page:
> >
> >
http://rvproject.com/race.html
> >
> > Two of the planes were not going for speed, but best economy.
> The two
> > fastest were tandem aircraft with a significant advantage
> there. Two
> > guys were running rich of peak (rivet and Eddie). I was
> running at best
> > power.
> >
> > If the overall speeds seem a little low compared to other race
> results> its because
> >
> > 1) we were all mostly doing something in improve efficiency
> > a little (for example, I climbed to 8.5k)
> >
> > 2) there was a 35kt quartering
> > cross wind
> >
> > 3) It was very bumpy
> >
> > 4)terrain required a climb to at least 5.5k to just squeak
> over the ridge.
> >
> > So don't be fooled, those are some very fast planes. I was seeing
> > true air speeds in excess of 190 kts [219 MPH] most of the way
> back. Dan
> > Checkoways plane in particular is an aberration.
> >
> > Good times. Keep building, its worth it.
> >
> > --
> > David Leonard
> >
> > Turbo Rotary RV-6 N4VY
> >
http://N4VY.RotaryRoster.net <http://n4vy.rotaryroster.net/>
> >
http://RotaryRoster.net <http://rotaryroster.net/>
> >
> > This well illustrates the importance of a good variable pitch prop.
> > Of course there are a lot of other factors in a cross country
> air race
> > such as climb and decent relative to winds aloft.
> >
> > Don't make the mistake of buying a $10,000 German MT prop.
> They are
> > about 10 to 20 knots slower than a good Hartzel or McCauly.
> Unfortunately> Tracy's gear box does not support a hydraulic
> constant speed prop.
> >
> > See if you can find an electric prop with carbon fiber blades.
> > The over priced MT props are wood with a thin layer of glass mat.
> >
> > My theory is; it all has to do with blade thickness out near
> the tip.
> > Efficient props have very thin tips as illustrated in the results
> > from this race and the fastest Reno racers. Wood is not stiff
> > and strong enough to make a thin prop blade tip possible. Metal
> > is better and carbon is better yet.
> >
> > Large diameter two blade props are always more efficient so
> > prop tips are always in the transonic range consequently
> > tip drag is all important.
> >
> > Paul Lamar ...No rotor no motor.
>
>
> look at :
http://www.variprop.com/
>
> i believe they just finished the RV-6A testing
>
> Kevin Lane
>
> That looks like a great idea. Apparently they use an annular hydraulic
> cylinder just like an automotive clutch throwout cylinder to change
> the pitch. No need for a hollow prop shaft. Should work with
> Tracy's box. I would specify carbon blades.
>
>
> Paul Lamar ...No rotor no motor.
Correct me if I am wrong. The price for a two blade Var-Prop is around
$8,000
Marc J.
Well I just guess they are trying to get rich quick.
We will have to look else where.
-- Paul Lamar ...No rotor no motor.
While not constant speed that price is still many thousands less than a MT.
If their blades and hub are good they will probably put a CS control on
it later.
Still worth a look.
Bill Jepson
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.