Subject: Sharpie 500 RV race
From: Rotary Engine
Date: 4/8/2008, 7:50 AM
To: AAA Put this in the To box



 > > Yesterday we had the first semi-annual Sharpie
 > > 500 RV race. It was a blast, with a lot good times and trash
 > talking.> But mostly it was a relaxing cooperative atmosphere.
 > My fixed pitch
 > > rotary RV-6 held its own with its over-pitched 3-blade prop against
 > > 180hp and 200hp RV's all with constant speed props.
 > >
 > > The results are posted at the bottom of the page:
 > >
 > > http://rvproject.com/race.html
 > >
 > > Two of the planes were not going for speed, but best economy.
 > The two
 > > fastest were tandem aircraft with a significant advantage
 > there. Two
 > > guys were running rich of peak (rivet and Eddie). I was
 > running at best
 > > power.
 > >
 > > If the overall speeds seem a little low compared to other race
 > results> its because
 > >
 > > 1) we were all mostly doing something in improve efficiency
 > > a little (for example, I climbed to 8.5k)
 > >
 > > 2) there was a 35kt quartering
 > > cross wind
 > >
 > > 3) It was very bumpy
 > >
 > > 4)terrain required a climb to at least 5.5k to just squeak
 > over the ridge.
 > >
 > > So don't be fooled, those are some very fast planes. I was seeing
 > > true air speeds in excess of 190 kts [219 MPH] most of the way
 > back. Dan
 > > Checkoways plane in particular is an aberration.
 > >
 > > Good times. Keep building, its worth it.
 > >
 > > --
 > > David Leonard
 > >
 > > Turbo Rotary RV-6 N4VY
 > > http://N4VY.RotaryRoster.net
 > > http://RotaryRoster.net
 > >
 > > This well illustrates the importance of a good variable pitch prop.
 > > Of course there are a lot of other factors in a cross country
 > air race
 > > such as climb and decent relative to winds aloft.
 > >
 > > Don't make the mistake of buying a $10,000 German MT prop.
 > They are
 > > about 10 to 20 knots slower than a good Hartzel or McCauly.
 > Unfortunately> Tracy's gear box does not support a hydraulic
 > constant speed prop.
 > >
 > > See if you can find an electric prop with carbon fiber blades.
 > > The over priced MT props are wood with a thin layer of glass mat.
 > >
 > > My theory is; it all has to do with blade thickness out near
 > the tip.
 > > Efficient props have very thin tips as illustrated in the results
 > > from this race and the fastest Reno racers. Wood is not stiff
 > > and strong enough to make a thin prop blade tip possible. Metal
 > > is better and carbon is better yet.
 > >
 > > Large diameter two blade props are always more efficient so
 > > prop tips are always in the transonic range consequently
 > > tip drag is all important.
 > >
 > > Paul Lamar ...No rotor no motor.
 >
 >
 > look at : http://www.variprop.com/
 >
 > i believe they just finished the RV-6A testing
 >
 > Kevin Lane
 >
 > That looks like a great idea. Apparently they use an annular hydraulic
 > cylinder just like an automotive clutch throwout cylinder to change
 > the pitch. No need for a hollow prop shaft. Should work with
 > Tracy's box. I would specify carbon blades.
 >
 >
 > Paul Lamar ...No rotor no motor.

Correct me if I am wrong.  The price for a two blade Var-Prop is around
$8,000

Marc J.

Well I just guess they are trying to get rich quick.
We will have to look else where.

> --
> Paul Lamar ...No rotor no motor.



Three blade is $8K.  also offers the radical ellipse blade style.  the owner
has spent $2M in design and testing over last 20 years.  if true then not
really rich nor quick :-)   think he said he has some boat props running
with this concept also.   i was interested because i could bolt it on my
current O-320 and later use it on the renesis.   didn't the mooney mite have
a mechanical variable speed?

Kevin Lane


Isn't the 2 blade MT electric prop $10K ? Or has it gone up with our
falling dollar ?
-dave


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.