Subject: oil to water heat exchanger part for Al
From: Rotary Engine
Date: 4/8/2008, 7:53 AM
To: AAA Put this in the To box




Paul,

This is an oil cooler we use for marine applications. This is the oil
portion and we surround it with a billet or cast tank for the coolant.

This size is good for a 800+ hp blown big block and we use 2 of them for
more hp. We can do a lightweight o ringed coolant box for these coolers
so they can be mounted to the firewall. Then you just mount it in the
path of the original heater hoses or in the lower radiator hose.

Please pass this on to Al for his velocity and see if he is interested.
The part has had no failures in many years of use with the marine shop I
do parts for.

This 8 plate cooler core cost me $156.00 and the mounting nuts to
convert it to -8 AN are $14 each. The coolant tank around it can be
billet or welded aluminum.

Larry



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.