I had the pleasure of attending the Rotamax forum at Sun-N-Fun. Eric Barger
speaker, many attendees important figures in aviation and rotary engines.
A very good presentation, highlighting features of the engine that make it
ideally suited to aircraft applications, outlining the future of the program
and commitment to produce a reliable functional installation.
I was most impressed with the level of research oriented testing and data
collection, collaboration with outside institutions for objective analysis
of the ongoing program. I truly believe this is not a flash in the pan
production just to garner investment. They are shipping normally aspirated 1
and 2 rotor engines, turbo 2 rotor should be available in 3rd or 4th quarter
of this year. Active research, again utilizing respected outside
institutions, into effective muffler/exhaust system as well as alternative
fuels. Stated production capability presently of 150 engines a month on a
single production shift.
I got to chat briefly with Nate Oldham, and was present to overhear a some
of a discussion with a major certified aircraft manufacturer while waiting
my turn to speak with Nate. If that relationship develops into a commercial
supplier agreement, look out Lycoming! My only reservations is the drain on
development resources an FAA certification program would have. The
experimental market, as well as all the other engine applications could lead
to profitability faster than the slow route taken my Mistral. OTOH a major
volume commitment from a major player just might do the same. Perhaps I'm
just selfish, and want my dream engine first.
Later in the day, we observed run-up demonstrations of the one and 2 rotor
engines. The 2 rotor was in the Sparrowhawk gyro and clearly produced a
great deal of thrust, straining against it's tie-down and making salad out
of the vegetation behind it caught in the prop-wash. When the muffler issues
get addressed this is going to be a fine power plant choice.
Unfortunately I could not find the Mistral installation that was said to be
there, nor the Saddler Vampire. With exchange rates what they currently are,
my own propensity to support American Made Products (when they meet the task
requirements) and the clear commitment to continuous product development the
Rotamax and Rotary Aircraft Engines have proven to be a credible, viable
alternative to the frozen in time flat air-cooled piston. I'm looking
forward to the introduction of the Skypower 180.
I'll upload pictures later once they get downloaded from the camera, for
those interested.
C. Smith
Ch-640 builder
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.