Paul,
I want to say thank you for your time this last week Sun N Fun was a great
success for RotaMax and the Rotary engine as a whole. Please see the
attached letter that was sent to us from one of your forum participants
after his visit here. Ben Bosma is a very knowledgeable and accomplished
in engineering, manufacturing and Aviation professional.
Eric Barger, President
Phone 419-694-3000 x 222
RotaMax Inc.
15152 Twp Rd 190
Arlington , OH 45814
Fax 419-694-1401
www.rotamax.net
"When I hear someone say that RotaMax is using OMC technology it sounds
as if they don't have an original thought in their heads.
Here's my impression having visited their plant and looking at the
manufacturing techniques employed in building this engine.
Addressing the OMC myth... RotaMax got only 5 heritage blueprints.
This is a fraction of the actual technical data package.
It was a starting point for sure but hardly a technology
transfer especially given the age of that technology.
What they did do is go after all the problems with something
that most enterprises lack and that is extreme human commitment.
Ignorance is a beautiful thing, sometimes. The OMC hasn't been
manufactured in decades. There have been a lot of improvements
in manufacturing in that time. RotaMax went to school and then
put in countless hours of human effort to get the engine right.
For example, the side plate does have a special metallurgical treatment but more importantly they are lapped flat to 10microns and which gives them not only a fine finish but almost an optically flat surface so the seals can do their job. This isn't technology, it's workmanship.
The rotables are matched and balanced to .02 in-oz. They told me that they ultimately want to create interchangeable rotor, eccentric and bearings but I like marrying them on the dynamic balancing rig. Maybe, the goal is good but I'd be willing to pay a premium for married and balanced rotables. The performance piston community does this matched piston, rod and bearing drill all the time. It's workmanship, again. I watched an engine run with the single rotor engine sitting on a tray and
running at full throttle. Try doing that with a piston engine.
The other notable impression is that RotaMax is downright anal about processes and procedures. This is called a quality system. Shop travelers and routers are detailed and support continuous improvement. If an audit system for ASTM ever happens RotaMax will be ready. However, all this paperwork isn't designed to impress visitors, it's there to ensure consistent parts. I'm accustomed to operating under Mil-Q-9858 and more recently ISO 9001:2000 and this is the sort of attention to detail
successful organizations have.
Now, one last thought and this is where I become subjective.
RotaMax is run based on a people oriented model. The ownership
has a long track record of successful business enterprises based
on a servant leadership model. No, there isn't a staff masseuse
but there is a genuine feeling of family and community in the personnel.
It starts at the top and goes throughout the way people are empowered
to develop improved processes at their workstations. This is apparent
in the clean, comfortable workspace and "can do" attitude of those employees
I got to meet. You can't hire that in you have to demonstrate this and
model it in your own work habits. I hope their success doesn't change
that attitude. In the years to come more OEMs will realize the benefits
of the rotary engine and adopt them into their products. This will mean
that RotaMax will grow in sales and size. This is where the strength
of the RotaMax management team will find the most challenges. I pray
that they will still support the specialty engine market especially
those of us who want to fly this engine. What is interesting is that
although, the company is not publicity hungry it's hard not to have a
lot of eyes on you these days. It's kind of like learning to play the
piano on the stage at Carnegie Hall... with an audience. Yikes!
So, if OMC was the starting point for the hardware it is a
good thing. But this is not an OMC. It is a RotaMax.
Eric Barger the president of RotaMax and contributor to this
group has the most complete collection of rotary engines I've
ever seen including some one of kind prototypes. This is what it
takes. Learn from the history but be open to new ideas. I'm
encouraged and can't wait to feel my first flight with a rotary.
-Ben "
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.