All,
I would appreciate any advice on a source for the steel s-beam material.
I checked mcmaster and didn't find any suitable box or U channels.

I purchased the 0.125 Al plate for the oil pan from Aircraft Spruce and
am laying out the pieces for the new pan now. I'm also working on a new
steel mount to relocate the alternator to the air conditioner position.

Thanks in advance,


--Kenny A.
http://websites.expercraft.com/kennya/

Kenny, it is bent up on a press brake from 4130 .065 sheet avilable from Aircraft
Spruce and other steel supplier companies. Makes sure you get a nice bend radius
in there like 1/4 inch or more.