Well, I removed it today. It all looked fine. No metal shavings. Felt
   free with no binding. Gave it a close inspection and re-installed it.
   Noise gone....beats me.

   Bob Mears
   Supermarine Spitfire

Bob, if your pump has the blade and slot drive, they may not have been
on center. Your fiddle with the pump could have reversed the alignment,
and brought the two shafts closer to proper alignment. I have seen that
happen.
Bill Jepson



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.