Subject: Two new youtube videos
From: Rotary Engine
Date: 4/22/2008, 8:18 AM
To: AAA Put this in the To box


    > > That looks very interesting, Once I get into this a little more I
    > may be
    > > able to turn one of those myself. The A&P I work for has a big
    > lathe
    > > like the one in your photo.
    > >
    > > Dan
    >
    > Dan,
    > That's Cheap Chinese lathe, a big lathe would be great - CNC would be
    > wonderful.
    > George ( down under)
    >
    >
    > This one is not Chinese but it is a big old thing not CNC. I do have
    > access to a CNC machine from a fellow EAA member. At least I
   think it is
    > it has a computer panel.
    >
    > Dan

   Dan,
   Big old manual is good, the grinders do the finishing work. The smaller
   lathe has some flex in the tail-stock, due to the eccentric. Leave
   20 th.
   for finishing.
   George ( down under)

Did you just use a two rotor shaft as a pattern or do you have a set of
plans?

Dan



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.