Dear Mr. P. lamar,
I have for a long time been looking for a rotary engine - but have
failed to find exactly what I need.
I need about 500 - 600 HP with mechanical adjustable prop w/reverse.
I need the engine for an air boat project.
Will you help me?
Yours sincerely,
Arne Egidiussen
500 to 600 HP is no problem but reverse thrust and a gear box might be
proplems.
Contact Mazdatrix and have them build a 3 rotor turbo for you.
http://www.mazdatrix.com/
Another source for such and engine is:
http://www.racingbeat.com/
A third is:
http://www.xtremerotaries.com/
The web site appears to be down but call Croydon NSW Australia
information
and ask. I think the following are dealers for xtremerotaries.
Turbosmart Head Office PO Box 264, Croydon NSW 2132 Australia
Turbosmart USA 1185 Park Center Drive, Suite Q Vista, CA 92081, USA
http://www.rotaryeng.net/boatvideo.wmv
MT have an adjustable pitch prop but reverse
might be a problem. Call them and ask.
http://www.mt-propeller.com/en/entw/stceasa/pilatus.htm
There are two possibilities for gear boxes.
Mistral and build your own.
http://www.mistral-engines.com/
Paul Lamar ...No rotor no motor.
G'day Paul & Group,
For you information,- I spoke recently to the ex principal of Xtreme
Rotaries & can advise that he is no longer operating that business, he is
apparently too busy with other exciting things.
Cheers,
Mal Booth (also down-under)
That is too bad. Does that mean they are out of business?
Nobody is making their parts anymore?
No more three and four rotor shafts?
--
Paul Lamar ...No rotor no motor.
I can't say but Ric Shaw at
ric.shaw@bigpond.com may have more information.
Mal Booth
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Copyright 1998-2007 All world wide rights reserved.