Hi Brian,
Something didn't sound right about sandwiching ANYTHING between the
prop flange and the drive flange, so I went out to my workshop and
looked at my Hartzel props. Sure enough the spinner bulkhead is
attached
to the OD (outside diameter) of the prop flange. Its an elaborate setup
but, the bottom line is there is DIRECT CONTACT of the prop flange and
the drive flange, no bulkhead, no RTV, no aluminum disks, no carbon
fiber or fiberglass. I have 2 props --a 2 blade & a 3 blade-- both are
done the same. Hope this helps. Dave M
>Dave,
>Would it be possible to send a photo?
>Thanks,
>Brian Trubee
Hi Brian,
Photo would not show much. Take a look at the attached sketch. It's not
to scale but all the parts are there. If you need sizes or more info
just shout. Dave M
My Spitfire came with the Spinner and a front and rear flange. Showing
the rear flange between the prop and prop hub, the front on front of the
prop. Prop bolts holding all this together. Is this an improper
installation?
Bob Mears
The smaller three rotor torque pulse is a positive while the additional
average torque is a negative. What is the back plate made out of? If
aluminum you will probably be OK.
Paul Lamar ...No rotor no motor.
If the prop is aluminum, the bolts can be torqued plenty for this to work fine.
This is really the normal spinner installation on all of the
fixed-pitch Cessnas, Pipers, etc. A backplate (and sometimes a front
plate) held in place by the prop mounting bolts. Usually with drive
lugs splined through the flange - offering more bearing surface for
the torque loads in the prop and spinner.
The c/s props have spinner backplate mounting flanges that don't use
the same fasteners as which hold the prop to the crankshaft - like
Dave M depicted. I suspect part of the reason for this is that
there's a high pressure oil connection made by attaching the prop to
the crankshaft. Adding the spinner backplate to this stackup seems
like you'd eventually get leaks at this connection.
Regards,
Matt-
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.