Liz Barratt-Brown, a senior attorney with Washington-based Natural
Resources Defense Council, said yesterday the coalition is hoping to
influence how Americans and U.S. policy-makers view the oilsands.
"We don't think we can ban it, but I think we can say, 'Look it needs to
be cleaned up'."
© The Ottawa Citizen 2008
I did not know there was a U.S. cap on Alberta oil.
Will somebody explain why the refining process does not clean the
oil? If the US does not want it the Canadians can always build
a pipe line to the nearest sea port.
Paul Lamar
I am not an expert on this, but i try :)
Here's some links:
http://en.wikipedia.org/wiki/Oil_sand
http://tothetarsands.ca/2007/09/27/greenhouse-gas-emissions/
Extracting the regular crude to one barrel of refinery-ready product
creates less CO2 emissions than making the same from tar sand.
Difference is currently about 23%, according to sources above.
But, it is claimed that this emission difference is about just the same
as with US corn ethanol CO2 production emissions compared to regular
gasoline. So, tar sand crude is not particularly "dirty" in this sense,
compared to some other alternative fuels.
Strip mining the tar sand is another issue, but there's not nearly as
dirty enrichment processing required as with eg. uranium. That's total
mess, and cannot compare here. Tar coal mines are required to reforest
the area after mining is concluded, so there will not be a black void
left after that. That's not to say that any of us would be very happy
about strip mining operation on our neighbourhood ;)
Currently, there's lots of research on extraction technology going on,
and it might be possible to cut "tar-barrel" production emissions by
maybe 20-40%. So this is a moving target too.
I think one of the more effective means to cut global CO2 emissions
would be to create an aftermarket, relatively cheap, drop-in energy
recovering CVT for existing passenger and delivery cars.
That would be able cut typical stop-and-go city traffic emissions
considerably. As has been discussed here before, Tom Kashmer's Hydristor
seems very interesting in this respect.
http://www.hydristor.com
One other thing to do could be to create a clean and cheap small
electricity plant, especially for third world countries - eg. rural
China and India. I have thought that maybe wind energy (conventional or
vertical rotor) connected with very efficient genset would be the right
answer.
The thinking behind this is - there's at least 3.5 billion people there
on third world, most without minimum or non-existent infrastructure.
They will get this thing fixed sooner or later, and it is globally
significant whether they will have a means to do it economically and
ecologically sound way.
And, to
_really_ solve this energy issue - we truly need a useful, clean
and abundant new energy source.
And begin to use that, instead of boiling water and burning bugs - as we
have done past 300 years.
Cheers,
Petri
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.