I've read not to allow CF epoxy to be in contact with aluminum. Is that
true? What if you do a wet lay-up with the epoxy carbon fibber over the
aluminum ? Or, if completely true, will it work if you put a single
layer of e-glass over the aluminum first ?
-dave A
Dave,
Carbon is what you don't want in contact with aluminum the epoxy is OK, but
to enable a more suitable depth to the separation you need some fiberglass
and epoxy. The very thin layer of epoxy ( covering the carbon) will soon
wear through if there is any rubbing at all and you need the fiberglass as
a buffer.
George ( down under)
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.