I've read not to allow CF epoxy to be in contact with aluminum. Is that
true? What if you do a wet lay-up with the epoxy carbon fibber over the
aluminum ? Or, if completely true, will it work if you put a single
layer of e-glass over the aluminum first ?
-dave A
I'?ve been in the aviation composites business for ten years now, so I
can tell you there is no problem with corrosion between standard carbon
fiber/epoxy and aluminum. The comment you heard about not laying-up on
aluminum may pertain to the fact that it is extremely difficult to get a
good bond to metals. However you should coat any metals you use in your
aircraft with a corrosion resistant primer.
Rob Lutz
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.