Guys:
My recent posting stimulated a lot of action. Thanks for the interest.
It looks like a least a couple of "Rotaries" will attend the
Golden West
Fly-in at Marysville, June 6-8.
The GW forum chairman has allocated a space for me and the Ray
Brotherswhich we will not have to share, but can have undisturbed
throughout the
meeting. The beauty of this is that we will have safe storage for our
stuff and won't have to set up and take down while another speaker
needsthe place.
Right now, neither the Ray Brothers nor I have a specific presentation
to be described in the printed program. I need to coordinate with the
brothers soon, but I'm not worried. They gave my pitch last year
at the
11th hour when I had to bail out because of my wife's medical
problems.This time, they will have their own thing while I
demonstrate infusion.
It'll be a good show. We need to choose times for our main show,
which I
expect will be Saturday for sure and probably Friday afternoon. These
fly-ins tend to implode by Sunday afternoon, though I had very good
attendance 3 years ago on Sunday afternoon. As presenters, the
trick is
to grab the good Friday and Saturday times when the crowds are
large and
we have that because we have established credibility with the
Committee.This arrangement allows time for non-scheduled
conversations with really
interested builders.
A bit on infusion: You may have seen some of the videos by PTM&W or
AirTech on YouTube or wherever, or you may have seen the video and
catalog offerings by FibreGlast. If you fish around with Google, you
will find some excellent Dutch work on high performance boats. As a
general rule, these techniques are used for large structures
(boats) or
smaller items, often complex automotive parts, and often only
cosmetic,like door liners, and using carbon fiber for "looks."
They dump
$100/gallon epoxy into overflow buckets like drunken sailors and
incorporate non-structural "infusion aid" material into the finished
part, increasing the cost and weight. We can't use it, as described.
I need to make large, thin, multi-layer skins because I wish to add
thick cores to those skins to make efficient sandwich structures.
One of
my readers put me onto infusion last fall. I knew about mainstream
applications, but ignored them as being inapplicable for
homebuilders. A
test of basic principles got me interested and I have spent much
of the
last six months developing practical techniques for making large
parts,like wing skins. I think that I have cracked the problem and
I will be
demonstrating the essentials of that solution at GW.
Zeke Smith, Aeronautpress.com psmith@napanet.net
Zeke, I wish I was going to be there, unfortunately I don't think thats
going to happen. Is there plans to provide this info in either book
or Video form in the near future? I'd love to get my hands on this
system and get some "know how". I've just installed a commercial
vacuum system for bagging and infusion in my shop. Infusion
has always been an interest, but like you I couldn't see how I
could make it work for full sandwiched parts and get
repeatable performance. Can't wait to learn more!
Thanks sir
Jarrett Johnson
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.