Subject: Who need more torque in an RX8?
From: Rotary Engine
Date: 5/7/2008, 6:04 AM
To: AAA Put this in the To box

I found the perfect transmission for the RX8.
It is out of a 2009 Mercedes-Benz SL63 AMG.
Mazda should license this transmission or buy it from
some other firm that acquires a license and makes a cheaper
version. Heck copy it :) It is a perfect high efficiency
transmission for a a high RPM, high HP, low torque engine
like the rotary.

It could be scaled down but the cost of doing that
may not be worth the weight savings as Mercedes
is putting 604 HP through it with a much heavier
car. It might be perfect in trans axle form for
a trap door p-port 450 HP 3 rotor in the RX8. Heck
I would settle for it in a 2 rotor trap door
P-port 300 HP RX8 with a front  mounted transmission.

It would yield better MPG because a higher gear ratio, lower RPM could
be used for freeway cruise. Instant step down in 0.1 second when
you need to accelerate. Even the road racers would love it.

Here is what Road & Track had to say about it.

"We found that the Sport + and Manual modes were best (there's also Comfort, Sport.. .
and Race Start, a launch-control mode  for slam-dunk, repeatable hard launches),
with the Sport+ mode almost reading your mind-it can drop from 7th to 4th gear,
or from 5th to 2nd under hard braking. Stomp, decelerate, mash; it always seems
as if you're in the right gear exiting a slow corner, with an explosive rip of
computer-ordered revs to match the engine and wheel speeds. The system actually
double-dec1utches on downshifts in S, S+ and M modes."
-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.