Subject: Does anybody know: JetA spark ignited ?
From: Rotary Engine
Date: 5/19/2008, 4:53 AM
To: AAA Put this in the To box


Rotary engines can run on jetA, with spark ignition (no hope to get the
compression for diesel ignition).

The question is: how easily can an existing rotary engine be converted to
jetA. Then next question: what kind of BSFC can be expected ?

Thanks for the xperts who will provide answers to these.

Rotamax, would you know ?

Rgds
Philippe CHENEVIER (in France)

--------------------------------------------------------------------------
Wankel Germany tried it awhile back. It can certainly be made to work.
Power is down and BSFC is no better if not worse.

http://www.wankel-ag.de/seite1_e.html

This site claims the BSFC was worse at 330 g/kWh for heavy fuel
and 300 g/kWh for gasoline.

Multiply g/kWh by .00163 to get pounds/HP Hour  BSFC.

In other words 300 g/kWh is .49 BSFC U.S.
330 g/kWh is .54 BSFC U.S.

Not bad but a leaned rotary engine in cruise is .47.

BTW according to the Cessna web site this is about what
a Thielert Diesel gets at aircraft power levels.

One can calculate the data from the attached jpgs.
Compare the Diamond numbers at 90% power and 50% power.

Here is an older message from Francois at Mistral on the subject.


" OK, Paul, you got your interim report on Mistral jet-fuelled rotary
development.
I'll try to be brief.
Mr Chenevier is correct, compression ignition is out of the picture
with rotary technology.  Mistral is developing with the Swiss Federal
Institute of Technology in Lausanne (EPFL) a SPARK-IGNITED, high-pressure
direct-injected jet-fuelled rotary engine.  We are 15 months into the
program with another 12 months to go.  The objective is to achieve a
power-density of at least 100hp per rotor (of 654cc).  The development
is going in the right direction but there are still many issues to be
solved.
Let's say that, in the best of case, we are 24 months away from a flying
prototype.
We do this development because some markets require heavy-fuel engines
(the military especially).  But a valid question is:  why use Jet-A in an
internal-combustion engine when this fuel was designed for turbines?  Sure,
it is possible as diesel engines have demonstrated, but at the cost of
significant additional complexity, heavier weight, reduced power density,
higher manufacturing, maintenance and overhaul costs, and reduced
reliability."

Don't let me dissuade anybody else from adding to this thread.
-- 
Paul Lamar ...No rotor no motor.


Philippe,

We have run our engine on Diesel fuel, and our engine program manager has
run Mazdas on diesel in the past. One thing to overcome in a spark ignited
diesel is the cold weather starting. Need high speed cranking and you need
fuel preheat for this to work well. We hope to be more involved in this
topic later this year and will report this too the forum.

Eric Barger
RotaMax Inc.
www.rotamax.net

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.