> All,
>
> My salvage engine arrived w/o a waterpump pulley. While googling for
> replacements, I've noticed options for 'underdrive' pulleys, wide-belt
> pulleys, and pulleys with dual (redundant) belts.
>
> Example:
>
http://www.srmotorsports.com/RX8_Power_Pulleys.html
>
> Tracy mentions in his conversion manual that he was adding an underdrive
> pulley, but didn't really comment on the outcome.
>
> My instinct is to go with a redundant system, but I haven't found one
> that includes both water & alternator pulleys (rx8). Short of that, the
> reasoning behind the underdriven system seems logical, but "I don't know
> what I don't know".
>
> Opinions?
>
> Thanks,
> --Kenny A.
>
http://websites.expercraft.com/kennya/
>
> ---------------------------------------------------------------
>
> It is not necessary to run a underdrive pulley as in aircraft use
> we only use up to 7500 RPM. You need as high a water flow as you can get.
> Electric water pumps are not up to it.
>
> Just make sure if the belt flies off it does not take
> out the ignition or fuel system. Its happened.
> --
> Paul Lamar ...No rotor no motor.
Question: Would it be better if the belt was replaced by a chain or by
gears? "Better" means, more reiable, safer, much less liable to take
ouft the ignition or fuel system.
It has been done before. Back in the day, Keith Black offered, as an
option on his V-8's, to replace the belt from the crankshaft to the
camshaft with a geared arrangement.
And yes, I am aware that it costs. Even back in the day, HOt Rod
Magazine noted that the Mr. Black's geared camshaft option: " . . . it
is not inexpensive." But, if it MUST work all the time . . .
Les
Gears are better IMHO.
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.