Subject: S Beam for Long EZ
From: Rotary Engine
Date: 6/2/2008, 8:54 PM
To: AAA Put this in the To box



Paul,  some time back you did some drawings for Joe Graham's long EZ
project.   He wants the absolutely shortest S-beam that can be
fitted.  I proposed an 18.5 inch between centers beam and he still
wanted shorter.  I thought he was going to contact you, but I have not
heard a word.  He sent me a deposit which I should either send back or
come up with an S-beam that fits his project.  So that is the
question.  What is the shortest S-beam that can be fitted?  Would it
have to be fitted with stiffer Barry Controls due to the reduced
leverage?
Jerry

This is what I have so far. There are two issues. Heat in the rubber
bushings and clearance for the oil pressure fitting on the left side
of the engine.

-- 
Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.