Subject: Hey that's not a Cougar
From: Rotary Engine
Date: 6/5/2008, 10:29 PM
To: AAA Put this in the To box


    I am putting on the last coat of paint today on the Cougar fuselage
    only. Most of the stripes are on the body so the hard part will be
    over. While waiting for the bug spray to clear out I thought I would
    share my last restoration that I gave to my son after graduating
    collage. He brought it back over for some work. I will have to drive it
    around for a while, you know for testing purposes.

    By the way I am using Stewart Systems paint great stuff. I also bought a
    vinyl cutter so I can cut "N" numbers in vinyl or masking, slanted,
    shadowed or straight. I can also cut graphics.

    Dan

    What is the difference between a Cougar and a Tailwind?
    http://www.aerotrader.com/find/listing/photos/92652018/

    Paul Lamar



Very little. Most use designs from both. The Cougar wings are short and
fat. The Cougar usually has a 85 hp engine that goes 150 mph. The
Tailwind uses a 160/180 Hp engine to go 180/200. It would be so cool to
stick a single rotor turbo in this one.

Dan


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.