Is anything special as far as the rotary happening this year at
Oshkosh? l drove up last year, bought a full week pass and was bored
beyond words after the second day.
I wonder if RotaMax is going to do anything like putting adequate
hp in the Vampire? Eric, are you reading this? Its time to show
off!!! We are all pulling for a great success for Rotamax. I'd come
to Oshkosh just to see that.
I will definitely make it as far as Baraboo (fifty miles south of
Oshkosh) where the Tailwinds and Buttercups gather for several days
prior to Oshkosh. From there, unless there is a good reason to go
on, I think I will turn around and head for home. Jerry
I only stay 3 days at the max. When does that Baraboo thing start? I might
stop in. This year may be way down due to the price of avgas.
Paul Lamar
Jerry,
The Sadler Vampire is at our facility and will have 100 Hrs of flight time
if weather cooperates by Osh Kosh.
It has plenty of power and our hopes are to fly it up to Osh Kosh.
A few other customer programs are progressing in hopes of being at Osh Kosh
as well.
We are working another batch of 25 engines right now and will have them
completed and on there way to various application homes in the next several
weeks.
Our website has just been updated and we will continue to add content in
each category.
www.rotamax.net
Things are progressing well here with our engine program.
Thanks for your continued interest and support of RotaMax and our engine
program!
Eric Barger
RotaMax Inc.
Arlington, OH 45814
Fax 419-694-1401
www.rotamax.net
Hi Eric,
Thanks for the update. I see the turbo engines are now rated up to 7300 RPM.
Does that mean the normally aspirated engines can be run at that RPM as well?
If so what internal changes were made?
What airport are you flying out of. I would like to see the Vampire fly.
I missed it at Sun & Fun.
Paul Lamar ...No rotor no motor.
One other question Eric if you don't mind.
What gear box ratio is offered with the 7300 RPM turbo engines?
I assume it is 2.47:1 or better.
http://www.autoflight.co.nz/
"The choices of reduction drives available to owner builders just got bigger
with the release to the market of a range of reduction drives suited to the
Subaru engine of any of the other airmotive powerplants available off the shelf.
The gear units are mounted in double row angular contact high load bearings.
A choice of three ratios is available and five variants of the gearbox are possible.
The ratios are 2.21:1, 2.47:1 and 2.94:1
The first variant will fit the Subaru EA81 and 82 series engines.
These can be mounted offset down or up.
The next drives fit the Subaru EJ single cam series of engines.
Again, these can be mounted offset down or up
The final variant is a universal drive which can be mounted to a wide
range of motors via an adaptor plate"
End of quote.
Can that gear box be used with the normally aspirated engines?
--
Paul Lamar ...No rotor no motor.
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.