Subject: Mistral Crash maybe a exhaust problem
From: Rotary Engine
Date: 6/6/2008, 5:23 AM
To: AAA Put this in the To box


      > A Piper Arrow powered by a prototype Mistral
      > ( http://www.mistral-engines.com/ ) rotary aircraft engine crashed
      > after the
      > engine lost power following takeoff from Palatka Municipal-Lt. Kay
      > Larkin



I did the collapsed muffler deal at Sebring years back. The Flowmaster
(big suitcase looking thing) had all of the baffles piled up against the
rear outlet. The muffler swelled up like a giant pillow and the power
dropped off to nearly nothing. It didn't hurt the engine at all and we
raced at West Palm Beach the next weekend.

Lynn E. Hanover


Since you brought up the subject Lynn it is time to revisit the proper way of welding
the exhaust pipes to the exhaust flange.

The weld must be around the inside of the flange and not on the outside.
Even better is to have a none welded ball joint where the pipe joins the flange
like this early Steve Beckham and Everette Hatch Power Sport configuration.
That allows the exhaust system to expand and contract without stressing the joint.

http://www.rotaryeng.net/flange-welding.html

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.