Subject: P-Port Renesis Housings
From: Rotary Engine
Date: 6/9/2008, 3:08 PM
To: AAA Put this in the To box



    I watched the F1 race in Montreal this weekend. The top RPM shown on TV
    indicated 19,000 RPM that is for most of the cars.

    On the personal side. If Mazda is capable of producing a PP B26
    running it for 24 hours. Then one should not be concerned if a PP
    engine will or will not work. It has already been done. It is only a
    matter of adjustments not a waste of time.

    Marc Joseph



One would not want to replace their engine after every flight though.
Higher RPM means lower life. What you need is a cost per HP per hr. This
is where the rotory shines because cost to rebuild is low.

Daniel Michaels

Nobody has worn a rotary engine out in an aircraft yet.
The internal failures have been due to FOD for the most part.
Wear per se does not appear to be a problem.
Especially when using ceramic apex seals.

-- 
Paul Lamar ...No rotor no motor.

FOD ???

Mark Pascall

N31PK

Foreign Object Damage.  Military pilot lingo.


Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.