What takes powder coating off of 4130 tubing? Besides dynamite.
Dave D
A sander? Sand blasting? Paint stripper?
--
Paul Lamar ...No rotor no motor.
NITRO.
Bill Jepson.
Being serious, If the frame is valuable it can be baked off. a Heat gun
capable of a bit over 400°F will soften it enough to scrape off.
Bill Jepson
A SS wire wheel on a bench grinder works really well, if your part is small
enough to move in front of the wheel. Otherwise Like Bill said heat gun and
once hot, scrape it off.
Rick
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.