Lynn, regarding your drawing of the open chamber muffler, were there
   also
   perforations in the transverse bulkhead plate at the aft end of the
   expansion chamber (supporting the front end of the perforated main
   tube)?
   You should get an award for keeping that heat tape on for that long.

   Steve Beckhamn



   Yes, here is a picture jpg.jpg, sort of. All I have is MS Paint.

   Lynn E. Hanover

   That is real talent Lynn. You should get yourself a copy of Rhino.

   Paul Lamar

      I have a full working copy of Turbocad if you want it.

      Dan Michaels

   Giving TurboCad away seems too popular a sport. I have that as well. I
   didn't like the small working area.
   I have it. Google has a free trial of their program, and it is really
   nice, But you are on the clock and it dies. Then you need to buy into
   it. You can make a shape and rotate it any number of degrees in any
   axis. Very advanced. I will look at Rhino.

   Lynn E. Hanover

   If you sign up for a local college course you can get a huge discount
   on Rhino and there is no time limit.

   BTW I would love to see a 3D of this last jpg Lynn.

   Paul Lamar


Lynn,  Curious about your Mooreover engine.  Do you have a functioning
proto?  Is that similar to the dynacam?  Whatever happened to the
dynacam?  Last I heard was some time back when Piper was working on /
with it.           Dave D



The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.