Subject: Exhaust and muffler design
From: Rotary Engine
Date: 6/12/2008, 9:36 PM
To: AAA Put this in the To box


> >I am wondering why no one is looking at the Spin tech line of mufflers.
> > They are compact and hold up as Tracy had one of the first ones on his
> > RV.  The only thing i can think of is that it did not have an
> > aerodynamic shape that one could hang from an RV.  I want to put it
> > inside the cowl on a pusher.  Is anyone currently using the spin tech?
> > Impressions?  It can be built in stainless 321.
> >
> > Joe Berki
> > Limo EZ
>
>
>
> > It lasted awhile and failed too. Also it was very costly
> > -- > > Paul Lamar ...No rotor no motor.
>
>
>
> We tested a muffler of this design on the flow bench and dyno but it did
not
> do that well.  Don't know if it were a Spintech brand or not.
>
> Steve Beckham

Paul,

Do you know when and how it failed. I wrote Tracy who was the first to try
the SpinTech .  He said he put 200 hours on it and it did not fail. he also
said that if the Hushpower muffler would not fit on the 20B he would use the
SpinTech.

Thanks

Joe Berki
Limo EZ

My mistake. I thought it failed because he took it off. Why did he take it off?

It wasn't very aerodynamic.

Bob W.

-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/cables/

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.