Subject: Heat exchanger oil to water.
From: Rotary Engine
Date: 6/12/2008, 6:23 AM
To: AAA Put this in the To box



The RX8 runs in the GT class. They "adjust" the weight I think just like
the GT class. It is not really car racing as all the cars have the same
chassis and body for the most part. Only the engine varies in the Prototype
class. Boring to me. Yes there are one or two other chassis's but most
are Riley. Typical
of Nascar where the Nascar engine of the futures has a four barrel carb
and pushrods are mandatory :) I tune them out and watch the just the GT race within.

No pictures came through Lynn.

Paul Lamar

Chassis:

Riley                     Each chassis is run on a NASCAR chassis dyno
every weekend. Limited to 500 HP.
Chase                   [V8] Engines below 350 Cubic inches are allowed 6
speed transmissions. [V8's] Over 350 must use
Dalara                   a 5 speed trans. Peak RPM is controlled.
Doren
Picchio
Lola
Crawford

Engines:

Ford [V8]
Pontiac (Chevrolet) [V8]
Lexus [V8]
BMW [V8]
Porsche [V8]

Lynn E. Hanover


What is the minimum weight limit?
Why don't they just give them all go identical Go Karts as automotive engineering
has nothing to do with it. It is not real car racing. Can Am was real car racing.

Ironically the Speed announcers talk like the brand of engine has something to
do with the performance of the car. They are either dumb or lying.
Typical NASCAR nonsense.

They better start thinking about becomming relevant to the real world or there
could a back lash to out law car racing as a gross waste of fuel. It happened
in 1973. I would support that unless they get their act together and allow
invention and innovation.

Paul Lamar ...No rotor no motor.

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.