Steve Beckman,

I have redrawn my manifold bracket to accept the flanged type header
tube. The four holes are to accept the top clamp plate. I have made the
plate a little bigger to accommodate this - now if I can only work out
the best way to do the flanges, but I'm working on it.
George ( down under)

George, please save those screen captures as jpg's and not bmp's.
-- 
Paul Lamar ...No rotor no motor.

George.

why do you want to retain the two original exhaust flange bolts? I think
they are over kill.

I have been using the four bolts only on my 12A based one rotor from day one
on, and never had a problem. I also use the upper original bolt on the PP
intake manifold.

Richard Sohn
N2071U

Richard,
I'm hearing you, I will look at that.
George ( down under)


The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2008 All world wide rights reserved.